Paradyne T1 T1 Access Mux 926x Manual de usuario descargar pdf (Pagina 108)

Setting Up

5-54

9161-A2-GH30-30

April 1998

Table 5-10. Communication Port Options (3 of 5)

Character Length

Possible Settings: 7, 8

Default Setting: 8

Specifies the number of bits needed to represent one character. The character length

must be set to 8 bits when using the communication port as the network communication

link.

 Character length defaults to 8 and cannot be changed if Port Use is set to Net Link

and Port Type is set to Asynchronous.

7 – Sets the character length to seven bits.

8 – Sets the character length to eight bits. You must use this setting if using the COM

port as the network communication link.

Parity

Possible Settings: None, Even, Odd

Default Setting: None

Provides a method of checking the accuracy of binary numbers for the COM port.

None – Provides no Parity.

Even – Makes the sum of all 1 bits in the character and its corresponding parity bit

always even.

Odd – Makes the sum of all 1 bits in the character and its corresponding parity bit

always odd.

Stop Bits

Possible Settings: 1, 1.5, 2

Default Setting: 1

Determines the number of stop bits used for the COM port.

1 – Provides one stop bit.

1.5 – Provides one and a half stop bits.

2 – Provides two stop bits.

Ignore Control Leads

Possible Settings: Disable, DTR

Default Setting: Disable

Specifies whether Data Terminal Ready (DTR) is used.

Disable – Treats control leads as standard operation.

DTR – Ignores DTR. This may be necessary when connecting to some PAD (Packet

Assembly and Disassembly) devices.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 325 326

Sin comentarios

Paradyne T1 T1 Access Mux 926x Manual de usuario Pagina 108