Paradyne 6212-I1 Manual de usuario descargar pdf (Pagina 19)

2. Hardware Installation and PC Setup

6212-A2-GB23-00 September 2005

2-3

Figure 2-1. Hardware Installation

5. Turn on your PC and any other LAN devices, such as hubs or switches.

6. Turn on the router using its power switch.

7. Verify that the router's LEDs are illuminated as shown in Tabl e 2- 1 .

If the LEDs are illuminated as expected, the router is working properly.

Table 2-1. LED Indicators

This LED . . . Should be:

POWER Solid green to indicate that the device is turned on. If this light is not

on, check if the power adapter is attached to the router and plugged

into an AC power source.

STATUS Solid green to indicate that the router can communicate with your ISP

via ADSL, or flashing when the router is trying to connect to your ISP.

ACTIVITY Flashing when the device is sending or receiving data over the ADSL

connection.

LAN Solid green to indicate that the device can communicate with your PC

via Ethernet, or flashing when the router is sending or receiving data

over Ethernet.

05-17712

CONSOLE

LINE

LAN 1

POWER

DEFAULT

RESET

LAN 2 LAN 3 LAN 4

Power

Switch

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 85 86

Sin comentarios

Paradyne 6212-I1 Manual de usuario Pagina 19