Paradyne 6212-I1 Manual de usuario descargar pdf (Pagina 25)

2. Hardware Installation and PC Setup

6212-A2-GB23-00 September 2005

2-9

8. After restarting your PC, open the Control Panel window, and then click on the

Network icon.

9. Select the network component labeled TCP/IP, and then click on Properties.

If you have multiple TCP/IP listings, select the listing associated with your

network card or adapter.

10. In the TCP/IP Properties dialog box, click on the IP Address tab.

11. Click in the radio button labeled Use the following IP address. Type an address

between 192.168.1.3 and 192.168.1.254 in the IP Address field and

255.255.255.0 in the Subnet Mask field.

12. Click on OK twice to confirm and save your changes. You will be prompted to

restart Windows. Click on Yes.

Windows NT 4.0

1. In the Windows NT task bar, click on the Start button, point to Settings, and

then click on Control Panel.

2. In the Control Panel window, double click on the Network icon.

3. In the Network dialog box, click on the Protocols tab.

The Protocols tab displays a list of currently installed network protocols. If the

list includes TCP/IP, the protocol has already been enabled. Skip to Step 9.

4. If TCP/IP does not appear as an installed component, click on Add.

5. In the Select Network Protocol dialog box, select TCP/IP, and then click on

OK.

You may be prompted to install files from your Windows NT installation CD or

other medium. Follow the instructions to install the files.

After all files are installed, a window appears to inform you that a TCP/IP

service called DHCP can be set up to dynamically assign IP information.

6. Click on Yes to continue, and then click on OK, if prompted, to restart your

computer.

7. After restarting your PC, open the Control Panel window, and then double-click

on the Network icon.

8. In the Network dialog box, click on the Protocols tab.

9. In the Protocols tab, select TCP/IP, and then click on Properties.

10. In the Microsoft TCP/IP Properties dialog box, click on the radio button labeled

Use the following IP address. Type an address between 192.168.1.3 and

192.168.1.254 in the IP Address field and 255.255.255.0 in the Subnet Mask

field.

11. Click on OK twice to confirm and save your changes, and then close the

Control Panel.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 85 86

Sin comentarios

Paradyne 6212-I1 Manual de usuario Pagina 25