Paradyne COMSPHERE 3800 Series Modems 3810 Manual de usuario Pagina 87
- Pagina / 204
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configure Branch
9-253810-A2-GB30-20 November 1996
Table 9-3
(6 of 6)
Line Dialer Configuration Options
MI/MIC Dialing: Disable
End Disable Enable
MI/MIC Dialing. Also known as D-Lead signaling, is required by some PBX systems, older data phones, and security
callback systems. It forces the modem into the originate handshake after first dialing a call.
Disable – Modem ignores activity on the MI/MIC contacts.
Enable – When Pins 3 and 6 of the TELCO jack (Models 3810 and 3820) are connected then disconnected, the modem
goes off-hook and looks for the answer sequence from the remote modem. If the sequence is detected, the local modem
will handshake and connect with the remote modem. A 26-pin D-Lead control connector is located on the rear of the
3000 Series Carrier. This connector is used for MI/MIC Dialing for Model 3811 modems.
The factory default is Disable.
AT command is S-register S83 =
n
, where
n
is 0 for Disable and 1 for Enable.
- COMSPHERE 1
- 3800 SERIES MODEMS 1
- MODELS 3810, 3811, AND 3820 1
- Printed on recycled paper 2
- Important Safety Instructions 3
- 1 modems 4
- United States 5
- Safety Instructions 7
- Table of Contents 10
- List of Figures 11
- List of Tables 12
- Objectives and Reader 13
- Assumptions 13
- How to Use This Manual 13
- Related Documents 13
- Introduction 14
- Features 15
- COMSPHERE 3800 Series 15
- 3800 Series Modem Package 17
- Model 3810 or Model 3820 18
- Modem Installation 18
- DTE Connection 19
- Dial Network Connection 21
- Model 3810 Dial-Line 21
- Connection 21
- Model 3820 Dial-Line 21
- Modem Power-Up 23
- Removing and Replacing 23
- Model 3810 and 23
- Model 3820 Modems 23
- Model 3811 Installation 24
- Model 3811 Modems 27
- DCP Operation 28
- Figure 4-1. Model 3810 DCP 29
- Figure 4-2. Model 3820 DCP 29
- Diagnostic Control Panel 30
- Status Indicators 31
- Diagnostic Control 33
- Panel Operation 33
- Menu Structure 34
- Top-Level Menu Status and 35
- Operational Messages 35
- MR* EC** 37
- Selecting Factory 40
- Configuration Options 40
- Using the Diagnostic 41
- Control Panel (DCP) 41
- Security Access 42
- Call Setup Branch 43
- Dial Standby/Return to Dial 46
- Talk/Data Branch 49
- Status Branch 51
- Test Branch 56
- Configure Branch 63
- 494-13080-02 65
- Configuration 69
- Table 9-1 70
- (1 of 7) 70
- (2 of 7) 71
- (3 of 7) 72
- (4 of 7) 73
- (5 of 7) 74
- (6 of 7) 75
- (7 of 7) 76
- DTE Dialer 77
- Table 9-2 78
- (2 of 5) 78
- (3 of 5) 79
- (4 of 5) 80
- (5 of 5) 81
- Line Dialer 82
- Table 9-3 83
- (2 of 6) 83
- (3 of 6) 84
- (4 of 6) 85
- , Installation Manual 86
- Dial Line 88
- Table 9-4 89
- (2 of 3) 89
- (3 of 3) 90
- Leased Line 91
- Table 9-5 92
- V.42/MNP/Buffer 96
- Table 9-6 100
- (5 of 6) 100
- (6 of 6) 101
- Test Configuration Options 103
- Table 9-7 103
- (2 of 2) 103
- COMSPHERE 3800 Series Modems 104
- Table 9-8 105
- (2 of 4) 105
- (3 of 4) 106
- (4 of 4) 107
- Security Configuration 108
- Table 9-9 109
- Control Branch 110
- AT Command Equivalent 111
- Clone To Remote 113
- Automatic Firmware 115
- Download 115
- Remote Branch 116
- Security 119
- VF-Side Passwords 120
- Command Set and S-Registers 121
- Security Branch 122
- Administrative Password 123
- EditPasswdTable 124
- Table 12-1 125
- Set Answer Sec 126
- Set Orig Sec 127
- Set Admin PsWd 128
- Security Password 129
- Entry Techniques 129
- Database 130
- Fax Operation 133
- Overview 135
- Operating Modes 135
- Command Guidelines 136
- AT Command List 136
- AT Command Format 137
- Dial T 140
- Break Send Break 146
- Buffer Break Forces 146
- Control Control Escape 146
- Control Control of 147
- of DTE Modem 147
- S-Register List 149
- Table 14-2 150
- (1 of 11) 150
- 3800 Series S-Registers 150
- S-Register 150
- (2 of 11) 151
- (3 of 11) 152
- (4 of 11) 153
- (5 of 11) 154
- (6 of 11) 155
- (7 of 11) 156
- (8 of 11) 157
- (9 of 11) 158
- (10 of 11) 159
- (11 of 11) 160
- Menu Tree 161
- 495-14436b-01 163
- Result Codes 165
- Table B-1 166
- Troubleshooting 167
- Table C-3 169
- Modem – VF Connection 169
- Symptom Action 169
- Technical Specifications 171
- Table D-1 172
- Specifications Description 172
- Pin Assignments 175
- EIA RS-366-A Pin 177
- Assignments 177
- VF Connector Pin 178
- Configure Branch 180
- Call Request Commands 181
- Call Response 181
- Incoming Call (INC) 182
- Disregard Incoming Call (DIC) 182
- Connect Incoming Call (CIC) 182
- Command Response 183
- Default Configuration Options 185
- Equipment List 189
- Glossary 190
Relacionado con productos y manuales para Módems Paradyne COMSPHERE 3800 Series Modems 3810
Módems Paradyne 3910 Manual de usuario
(244 paginas)
(244 paginas)
Módems Paradyne COMSPHERE 3811PLUS Manual de usuario
(12 paginas)
(12 paginas)
Módems Paradyne 3800 Manual de usuario
(213 paginas)
(213 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales